32406 ms ot 20051216-s00016 no.a0378-1/10 LA73060V overview this LA73060V is a wideband 75 ? video driver ic. the LA73060V is ideal for use the video output driver such as tv- monitor and dvd-player equipment. functions ? 6channel output. ? 6mhz or 30mhz low pass filter. ? 6db amplifier. ? output mute. ? y/c_mix. ? standby mode. specifications maximum ratings at ta = 25 c parameter symbol conditions ratings unit maximum supply voltage v cc max 7.0 v allowable power dissipation pd max ta 75 c ? 780 mw operating temperature topr -20 to +75 c storage temperature tstg -40 to +150 c ? when mounted on a 114.3 76.1 1.6mm 3 glass epoxy board. recommended operating conditions at ta = 25c parameter symbol conditions ratings unit recommending operation voltage v cc 5.0 v operating voltage range v cc op 4.75 to 5.25 v input pin voltage application range v in -0.3 to v cc op + 0.3 v orderin g number : ena0378 monolithic linear ic wideband 75 ? video driver 4 .com u datasheet
electrical characteristics at ta = 25c, v cc = 5v ratings parameter symbol sig level [vp-p] freq. [hz] in point out point conditions min typ max unit current dissipation 1 i cc 1 no signal. 69.0 87.0 105.0 ma current dissipation 2 i cc 2 standby mode,no signal. 0.3 0.4 0.5 ma reguratur voltage reg3v t27 2.8 3.0 3.2 v voltage gain 1 v g 1 1 0.3 100k t4a t6a t14a t12a t14a t16a t1 t35 t22 t30 t28 t26 output gain. 5.5 6.0 6.5 db voltage gain 2 v g 2 3 0.3 100k t8a t12a t16a t32 t24 t19 output gain. 5.5 6.0 6.5 db frequency characteristics 1 (cv,y,p y ,r,g,b) v f 1 (sd) 1 0.3 6m t4a t6a t14a t12a t14a t16a t1 t35 t22 t30 t28 t26 6mhz lpf is selected. f = 6mhz / 100khz. -3 0.0 3 db frequency characteristics 2 (c,p r ,p b ) v f 2 (sd) 3 0.3 6m t8a t12a t16a t32 t24 t19 6mhz lpf is selected. f = 6mhz / 100khz. -3 0.0 3 db frequency characteristics 3 (cv,y,p y ,r,g,b) v f 3 (sd) 1 0.3 27m t4a t6a t14a t12a t14a t16a t1 t35 t22 t30 t28 t26 6mhz lpf is selected. f = 27mhz / 100khz. -40 -35 db frequency characteristics 4 (c,p r ,p b ) v f 4 (sd) 3 0.3 27m t8a t12a t16a t32 t24 t19 6mhz lpf is selected. f = 27mhz / 100khz. -40 -35 db frequency characteristics 5 v f 5 (hd) 1 0.3 20m t14a t12a t14a t16a t22 t30 t28 t26 30mhz lpf is selected. f =20mhz / 100khz. -1 0.0 1 db frequency characteristics 6 v f 6 (hd) 3 0.3 20m t12a t16a t24 t19 30mhz lpf is selected. f = 20mhz / 100khz. -1 0.0 1 db frequency characteristics 7 v f 7 (hd) 1 0.3 30m t14a t12a t14a t16a t22 t30 t28 t26 30mhz lpf is selected. f = 30mhz / 100khz. -5 -2.5 0 db frequency characteristics 8 v f 8 (hd) 3 0.3 30m t12a t16a t24 t19 30mhz lpf is selected. f = 30mhz / 100khz. -5 -2.5 0 db frequency characteristics 9 v f 9 (hd) 1 0.3 75m t14a t12a t14a t16a t22 t30 t28 t26 30mhz lpf is selected. f = 75mhz / 100khz. -40 -35 db frequency characteristics 10 v f 10 (hd) 3 0.3 75m t12a t16a t24 t19 30mhz lpf is selected. f = 75mhz / 100khz. -40 -35 db continued on next page. 4 .com u datasheet
LA73060V no.a0378-3/10 continued from preceding page. ratings parameter symbol sig level [vp-p] freq. [hz] in point out point conditions min typ max unit 2nd order distortion 1 (sd) dst1 (sd) 1 0.7 4m t4a t6a t14a t12a t14a t16a t1a t35a t22a t30a t28a t26a -40 -35 db 2nd order distortion 2 (sd) dst2 (sd) 3 0.7 4m t8a t12a t16a t32a t24a t19a -40 -35 db 2nd order distortion 3 (hd) dst3 (hd) 1 0.7 10m t14a t12a t14a t16a t22a t30a t28a t26a -40 -35 db 2nd order distortion 4 (hd) dst4 (hd) 3 0.7 10m t8a t12a t16a t32a t24a t19a -40 -35 db clipping output level 1 v o max1 3 2 100k t4a t6a t14a t12a t14a t16a t1 t35 t22 t30 t28 t26 output level for clipping. 2.2 2.4 vp-p clipping output level 2 v o max2 3 2 100k t8a t12a t16a t32 t24 t19 output level for clipping. 2.2 2.4 vp-p amount of mute attenuation 1 v m 1 1 0.3 4m t4a t6a t14a t12a t14a t16a t1 t35 t22 t30 t28 t26 -60 -50 db amount of mute attenuation 2 v m 2 3 0.3 4m t8a t12a t16a t32 t24 t19 -60 -50 db crosstalk between channels 1 v ct 1 1 0.3 4m t4a t6a t14a t12a t14a t16a -60 -50 db crosstalk between channels 2 v ct 2 3 0.3 4m t8a t12a t16a -60 -50 db continued on next page. 4 .com u datasheet
LA73060V no.a0378-4/10 continued from preceding page. ratings parameter symbol sig level [vp-p] freq. [hz] in point out point conditions min typ max unit video s/n 1 (sd) v s/n 1 (sd) 2 0.65 t4a t6a t14a t12a t14a t16a t1a t35a t22a t30a t28a t26a v in = video (50% white), the band is between 100khz and 4.2mhz -70 -60 db video s/n 2 (hd) v s/n 2 (hd) 2 0.65 t14a t12a t14a t16a t22a t30a t28a t26a v in = video (50% white), the band is between 100khz and 30mhz -60 -50 db group delay 1 (sd) gd1 (sd) 1 0.3 6m t4a t6a t14a t12a t14a t16a t1 t35 t22 t30 t28 t26 input / output delay time. f=6mhz/100khz 20 30 ns group delay 2 (sd) gd2 (sd) 3 0.3 6m t8a t12a t16a t32 t24 t19 input / output delay time. f=6mhz/100khz 20 30 ns group delay 3 (hd) gd3 (hd) 1 0.3 30m t14a t12a t14a t16a t22 t30 t28 t26 input / output delay time. f=30mhz/100khz 10 20 ns group delay 4 (hd) gd4 (hd) 3 0.3 30m t12a t16a t24 t19 input / output delay time. f=30mhz/100khz 10 20 ns input signal sig.1 sig.2 sig.3 truth table sw no. pin no. function h (2.3v to v cc ) l (0 to 0.7v) sw1 5 y/c mix off on sw2 7 cv mute control off on sw3 11 power save control off on sw4 13 input control clamp on(rgb mode) bias on(component mode) sw5 15 filter control 6mhz lpf on(r gb mode) 30mhz lp f on(component mode) sw6 17 output control rgb on(rgb mode) component on(component mode) sw7 20 rgb&component mute control off on 4 .com u datasheet
LA73060V no.a0378-5/10 package dimensions unit : mm 3247a sanyo : ssop36(275mil) 1 36 18 19 0.8 15.0 0.5 7.6 0.2 0.3 (0.7) 5.6 (1.5) 1.7max 0.1 4 .com u datasheet
LA73060V no.a0378-6/10 block diagram 4 .com u datasheet
LA73060V no.a0378-7/10 test circuit diagram 4 .com u datasheet
LA73060V no.a0378-8/10 pin functions pin no. pin name signal wave form equivalent circuit 1 cv_out 35 y_out 2 cv_sag_in 21 34 p y _sag_in y_sag_in 4 cv_in 6 y_in y_in,py_in 14 g/p y _in rgb 5 7 11 13 15 17 20 sw1 sw2 sw3 sw4 sw5 sw6 sw7 *see the truth table. 3 10 25 31 36 v cc (cv) v cc (rgb&comp) v cc (driver comp) v cc (driver rgb) v cc (driver cv) continued on next page. 4 .com u datasheet
LA73060V no.a0378-9/10 continued from preceding page. pin no. pin name signal wave form equivalent circuit 8 c_in rgb 12 16 r/p r _in b/p b _in component 26 28 30 b_out g_out r_out 19 24 p b _out p r _out 32 c_out 9 18 23 29 33 gnd (cv) gnd (rgb&comp) gnd (driver comp) gnd (driver rgb) gnd (driver cv) 27 reg3v dc : 3.0v 4 .com u datasheet
LA73060V ps no.a0378-10/10 this catalog provides information as of march, 2 006. specifications and information herein are subject to change without notice. ? specifications of any and all sanyo products describ ed or contained herein st ipulate the performance, characteristics, and functions of t he described products in the independe nt state, and are not guarantees of the performance, characteristics, and functions of t he described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. ? sanyo electric co., ltd. strives to supply high-qual ity high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human live s, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe desi gn, redundant design, and structural design. ? in the event that any or all sanyo products (inclu ding technical data, services) described or contained herein are controlled under any of applicable local expor t control laws and regulations, such products must not be exported without obtaining t he export license from the authorities concerned in accordance with the above law. ? no part of this publication may be reproduced or transmi tted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, of otherwise, without the prior written pe rmission of sanyo electric co., ltd. ? any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipm ent, refer to the "delivery specification" for the sanyo product that you intend to use. ? information (including circ uit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. sanyo believes info rmation herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of in tellectual property rights or other rights of third parties. 4 .com u datasheet
|
